Original Singer 9 Spoke Hand Wheel - All Black - Genuine SIMANCO Part # 15282

Original Singer 9 Spoke Hand Wheel - All Black Finish - Genuine SIMANCO

Part Number: 15282

Shaft Size: 20mm

Finish: All black painted/enameled (no chrome rim)

Manufacturer: Singer (SIMANCO - Singer Manufacturing Company)

Condition: Vintage original parts - see condition grades below

About This Hand Wheel

This is an authentic Singer 9-spoke hand wheel with an all-black finish, manufactured by SIMANCO (Singer Manufacturing Company). Unlike the more common chrome-rimmed version, this hand wheel features a completely black painted or enameled finish on both the spokes and the outer rim, giving it a sleek, uniform appearance. These classic hand wheels were standard equipment on certain vintage Singer sewing machines from the early to mid-20th century.

The hand wheel (also called a balance wheel or flywheel) is the large wheel on the right side of your sewing machine that you turn by hand to raise and lower the needle, position fabric, or manually operate the machine. It's an essential component that connects to the machine's drive mechanism.

All-Black vs Chrome Rim

Singer produced hand wheels in two finishes:

• All Black (this listing) - Completely black painted finish on spokes and rim
• Chrome/Nickel Rim - Black spokes with chrome or nickel-plated outer rim band - View Chrome Rim Version Here

Both versions use the same Part # 15282 and fit the same models. The finish variation was based on the specific machine model and production period.

Compatibility - Fits Singer Models:

• Singer 15 series (including 15-88, 15-90, 15-91, 15-86, etc.)
• Singer 28 and 128 series
• Singer 66 series (late models with 20mm shaft)
• Singer 99 series
• Other vintage Singer models with 20mm hand wheel shaft

Important: This hand wheel fits a 20mm shaft. Please verify your machine's shaft diameter before ordering. Early Singer 66 models may have used a different shaft size.

Condition Grading System

Since these are vintage original parts, condition varies. We grade each hand wheel to help you choose the right one for your needs:

Grade A - Excellent Condition:

• Minimal wear and patina
• Black finish largely intact with minimal chipping or wear
• Little to no rust or pitting
• Ready to install and use immediately
• Best choice for restorations or machines in excellent condition

Grade B - Very Good Condition:

• Light to moderate patina and surface wear consistent with age
• Some paint wear, minor rust spots, or light pitting possible
• Fully functional with no structural issues
• May benefit from light cleaning or touch-up paint
• Great choice for working machines where perfect cosmetics aren't critical

Grade C - Good Condition:

• Moderate to heavy patina, paint wear, rust, or pitting
• Visible age and wear, authentic vintage character
• Fully functional - spins freely and works properly
• May require cleaning or restoration work for best appearance
• Budget-friendly option for machines that need a working hand wheel

All grades are fully functional. The grading reflects cosmetic condition only.

Why Choose an Original Singer Hand Wheel?

Authentic SIMANCO Quality: These hand wheels were manufactured by Singer to exacting standards. The casting quality, balance, and fit are superior to modern reproductions.

Perfect Fit: Original Singer parts are designed specifically for Singer machines, ensuring proper fit and smooth operation.

Historical Authenticity: If you're restoring a vintage Singer to original condition, an authentic SIMANCO hand wheel is essential for maintaining the machine's value and authenticity.

Built to Last: These hand wheels have already proven their durability - many are 60-100+ years old and still spinning smoothly. With proper care, they'll last another lifetime.

Distinctive All-Black Finish: The uniform black finish gives your machine a sleek, period-correct appearance that's true to certain Singer models.

Installation

The hand wheel attaches to the machine's main shaft with a setscrew or clutch mechanism (depending on your model). Installation typically requires:

• Removing the old hand wheel (loosen setscrew or release clutch)
• Sliding the new hand wheel onto the 20mm shaft
• Aligning properly and tightening the setscrew or engaging the clutch
• Testing for smooth rotation and proper engagement

If you're unfamiliar with hand wheel replacement, consult your machine's service manual or a qualified sewing machine technician.

Specifications

• Part Number: Singer 15282
• Manufacturer: SIMANCO (Singer Manufacturing Company)
• Shaft Size: 20mm
• Design: 9-spoke classic style
• Finish: All black painted/enameled
• Material: Cast metal
• Condition: Vintage original - see grade options
• Weight: Approximately 2 lbs

What You'll Receive

One (1) original Singer 9-spoke all-black hand wheel in the condition grade you select. The hand wheel will be carefully packaged to prevent damage during shipping.

Note: Due to the vintage nature of these parts, each hand wheel is unique. Photos show representative examples. Your hand wheel will match the condition grade description but may have slightly different patina patterns, paint wear, or other characteristics.

Care & Maintenance

To preserve your vintage hand wheel:

• Clean with a soft cloth and mild cleaner if needed
• For rust removal, use fine steel wool or a rust remover product
• Touch up paint chips with black enamel paint if desired
• Apply a light coat of machine oil or wax to prevent future rust
• Avoid harsh chemicals that could damage the original finish
• Store in a dry environment when not in use

Restore your vintage Singer to smooth, reliable operation with an authentic SIMANCO all-black hand wheel!